Parabolix Omni LED
The Parabolic OMNI is designed specifically for light shaping, to give videographers and photographers the beautiful light quality they love. No more flat COBs (chip-on-board) that are designed only for hard light, or flat panels that produce only flooded fill. The Parabolic OMNI has a 3-dimensional lamp that gives 3-dimensional light shaping, making it the ideal beauty and key light. While most LEDs are flat and have limited directional spread (ie, not good at filling soft-light modifiers), the OMNI creates a perfect omnidirectional spread, which fills your modifier completely and evenly, unlike any other lamp on the market. This gives you perfectly even and controllable light. It results in a rich and dimensional beauty light, with gorgeous highlights, and color/shadow transitions necessary for a beautiful soft key source.
Specifications
Rent From Flug
Omni Lamp:
| Optical System | Omni-directional LED lamp |
| Beam Spread | 360 degrees continuous |
| Mounting | 5/8" (16mm) socket adapter |
| Lamphead Voltage Input | 42 V DC LED, 12 V DC Fans |
| Lamphead Power Connection | Male 4-Pin XLR (Pin 1: Negative 42V / Pin 2: Positive 42V / Pin 3: Negative 12V / Pin 4: Positive 12V) |
| Color Temperature | 5500K |
| Color Rendition | CRI Average > 96, TLCI Average > 96, RA > 96 |
| Dimming | 0 to 100% Continuous |
|
Ambient Temperature Operation |
-4 to +113 Degrees F (-20 to 45 Degrees C) |
| Estimated LED Lifetime | 50,000 hours |
| Dimensions | Length 10.5" (267mm), Diameter 5.125" (130mm) |
| Weight | 3.6 lbs (1.6kg) |
Omni Ballast:
| Power Supply Input Voltage | 100 to 240 V-, 50/60Hz |
| Power Supply Output Voltage | 42V DC, 12 V DC |
| Power Supply Output Current | 0 - 5.72A |
| AC Power Input Connection | Neutrik NAC3FX-W |
| Power Output Connection | Female 4-Pin XLR (Pin 1: Negative 42V / Pin 2: Positive 42V / Pin 3: Negative 12V / Pin 4: Positive 12V) |
| Control | On-Board Controller, 0-100% Dimming, 5-Pin DMX In and Through, USB-A, On-Board On-Off Switch |
| Mounting | Omni Super Clamp Adapter |
| Remote Device Management (RDM) | DMX 512, Wifi 2.4 GHz control |
| Software Interface | USB-A: Firmware Upgrade through PC, Mac |
| Dimensions | 5.7 x 11.6 x 2.7" (145 x 294 x 68mm) |
| Weight | 5.8 lbs (2.6kg) |
Hardshell Case:
|
Construction |
Super strong reinforced polypropylene |
|
Dimensions |
Interior: 17.87 x 12.87 x 6.12 in. (45.4 x 32.7 x 15.6cm) Exterior: 20.31 x 15.5 x 7.37" (51.6 x 39.4 x 18.7cm) |
|
Weight |
9.75 lbs (4.4kg) |
